MAGNE-TRAC™
Magnetic Liquid
Level Indicator ...

* Easy to install, low maintenance, and
easy to view
* Innovative flag design—each flag contains two high strength magnets
* 360º Magnet Assembly for Consistent Flipper to Float Coupling
* Corrosion resistant moving parts
* Impact resistant polycarbonate indicator window
* Available to ASME B31.1/31.3 Standards

MAGNE-TRAC™
PLUS
Magnetic Level
Indicator
+ Bridle Chamber ...

* Innovative design maximizing
magnetic field
* Wide flag enhanced
indicator view
* Corrosion resistant moving parts
* Impact resistant polycarbonate indicator window
* Fabricated to ASME 31.1/31.3 standard

MTLT-5000
Transmitters
Magnetostrictive Transmitters for Magne-Trac Gages ...

* Mounts externally
to the Magne-Trac
* Requires no maintenance or recalibration
* FM approved
Explosion Proof/IS
* NEMA 4X/7
enclosure
* Adjustable output damping

MTLS-1A
Level Switch
Mount onto the magnetic level gauge chamber. As the magnetic level gauge float travels, it activates the switch through the chamber ...

* Attached directly to chamber. Easily adjustable with clamps – no additional piping required
* Low cost alarm solution
* Single Pole Double Throw (SPDT) Switch
* Minimum Temperature Rating -40°F
* Enclosure Classifications Class 1 Div1; Groups B, C,D

MLTS-10A
Level Switch
Magnetostrictive Transmitters for Magne-Trac Gages ...

* Suitable for high / low level sensing
* Directly coupled with float magnetically – no direct connection with process fluid
* Latching, bi-stable design. Switch maintains state until return float passage in opposite direction
* Double Pole Double Throw configuration
* Attached directly to chamber. Easily adjustable with clamps – no additional piping required
* Minimum Temperature Rating -40°F
* Enclosure Classifications Class 1 Div1; Groups B, C,D

Maverick In-Tank Transmitter
Direct Insert Transmitter ...

* No maintenance required
* Multidrop HART Communications
* FM approved
Explosion Proof/IS
* NEMA 4X/7
enclosure
* Offers a 4/20 mA 2-wire loop powered circuit for continuous level measurement
* Adjustable output damping
* Process temperature range -30 to 400°F

Guided Wave Radar
Local Indication & Redundant Measurement...

* Precise and dependable readings
* Maintenance-free
* Multivariable output readings – total level or interface
* Top/Mount design provides easy fit to chambers
* Extensive selection of materials and process connections
* High pressure / high temperature applications available

MLTS-PNEU
Non-Bleed Pneumatic Switch...

* Attached directly to chamber. Easily adjustable with clamps – no additional piping required
* Integral high volume, rapid response relay
* Magnetic Coupling design concept – no direct connection with process fluid
* Non-Corrosive housing
* Vibration resistant
* NEMA 4, stainless steel enclosure

Steam-Trac STB-3000
Direct Reading Steam/Water Gauges...

* For 3000 PSI Working Steam Pressure (WSP)
* Fully compliant with ASME as a Direct Reading Water Gauge
* Continuous one-piece chamber
* Innovative LED Illuminator design
* Custom built per specifications
* Bolts are nickel plated
* High temperature coating

Steam-Trac ST-1600, ST-1000, ST-450, ST-350
Direct Reading Steam/Water Gauges...

* For 1600, 1000, 450, 350 PSI Working Steam Pressure (WSP)
* Fully compliant with ASME as a Direct Reading Water Gauge
* Multiple sections with minimum 1” overlap
* Spring washers for constant torque
* Recessed gasket face in chamber and cover
* Custom built per speci?cations
* Studs, nuts and washers are nickel plated
* High temperature coating

Large Chamber Gauge
Specialty Gauges : Boiling, Flashing & Foaming of Liquid...

* The large diameter chamber for accurate readings in boiling, flashing, and foaming liquid conditions
* Large diameter chamber of heavy duty seamless steel pipe
* Made to lengths of standard flat glass and multiple sections are available
* Reflex and Transparent large chambers available

Glass-Trac Reflex
Liquid Level Gauges and Valves...

* Three Pressure Series (Maximum 4000 PSIG @ 100F) Consult Factory Ultra High Pressure, Up to 6000 PSI
* Tapped for ½” or ¾” NPT Connection
* Different Materials are Available to meet your specific Process Conditions
* Standard to Fully Engineered Designs

Sight Flow Indicator
straightforward and dependable way to determine the flow of liquid in a process line for low pressure industrial, sterile, and hygienic applications...

* Single Tube (Model QSF) & Double Tube (Model QDSF) options available in Armored and Full View Styles
* Borosilicate Glass & PTFE Teflon® wetted parts for high temp corrosive processes applications
* Mechanical Press Fit Seal on the outside diameter of the glass sight tube. Designed to  eliminate stresses caused by differential expansion between the housing and sight tube preventing leaks
* Polycarbonate Protective Shield for Double Tube Sight Flow Indicators. Safeguards  borosilicate glass with an open 360° view
* 100% testing. Each internal chamber hydrostatic pressure tested
* Variation of sizing options available diameters of 1” – 10” in lengths up to 60”
* Flanged or Sanitary Fittings available on all models